How can I circumvent Winston for a specific device on my network?

Follow

At this time, everything connected to Winston from the LAN port will be protected by Winston. If a device uses specific domains, you can whitelist those and the device will essentially work without Winston.


Alternatively, you could set your network up as follows to have a device not on the Winston network:

Wall jack --> modem --> router* --> (one port of router leads to device you don't want on the Winston network), (another port leads to Winston --> router --> other devices to be protected by Winston)

 

If you have a combination device, it would look like this:

Wall jack --> combo modem/router* --> (one port of router leads to device you don't want on the Winston network), (another port leads to Winston --> router --> other devices to be protected by Winston)

 

*you probably need to open ports 7777 and 7776 for Winston to work properly.

0 out of 0 found this helpful

Comments

0 comments

Article is closed for comments.